Aeon Labs Micro Switch G2

Product Description

The Aeon Labs Micro Switch G2 is a low-cost Z-Wave appliance module specifically used to enable Z-Wave command and control (on/off) for existing in-wall switches. 

The wireless module is powered from the mains supply and is a three-wire design which requires a neutral connection. In the event of power failure, non-volatile memory retains all programmed information relating to the units operating status.

It also is a repeater in the Z-Wave network. Acting as a bridge for communication, it will forward Z-Wave command messages to their destinations if the originating controller is out of range from the destination node.

By taking advantage of the Z-Wave mesh network, commands can be routed to their destination via intermediary "listening" Z-Wave products. Products that are Z-Wave certified can be used and communicate with other Z-Wave certified devices.

Product Highlights:

• Enable Z-Wave in any existing in-wall switches
• Turn lights and appliances on/off
• Maximum load: 10A
• Hidden in-wall behind faceplates
• Z-Wave explorer frames