Free Delivery

on all UK orders

Fibaro Double ON/OFF Relay Switch 2x1.5kW

£48.00  £43.20
10% off

Sold Out
  • Manufactured by: Fibaro
  • Model: FGS221

Product Description

Radio controlled Fibaro Double On/Off Relay Switch is designed to be installed in standard wallswitch boxes, or anywhere else where it is necessary to operate two independent devices of 1.5kW combined power output. Fibaro Double On/Off Relay Switch can switch on or off connected devices either through radio waves or through the wall switch connected directly to it.

 

Product Highlights:

  • Controlled through other Fibaro devices or any Z-Wave controller
  • Microprocessor controlled

 

 

Technical Data:

  • Power Source 110V - 230V +/-10% 50/60Hz
  • Max. single AC output: 8A / 230V 50/60Hz
  • Max. single DC output: 8A / 30V
  • Max. combined power output (resistive loads only) - 2 x 1.5 kW (in case of loads other than resistive it may be necessary to connect lower output in order to protect the Switch from damage)
  • Conforms to UE requlations:EN55022 (radio wave interference), EN61000-6 (safety of use)
  • Overheating protection: safety off at 105oC
  • Ambient temperature: 10oC - 40oC
  • To be mounted in standard wall switch boxes > 50mm
  • Radio protocol: Z-Wave
  • Radio Frequency 868 MHz
  • Antenna range: up to 50 meters outdoor, or up to 30 meters inside (depends on building structure)
  • Outside dimmensions (L x W x H) 42mm x 36mm x 15mm